For various reasons you may need to install a secondary SIM card into the CDS-9090. This will need to be coordinated with Intwine Support so that we can configure the internal box settings properly. Below is the directions to physical install the SIM card.
1. Locate the Date Remote box installed by Intwine. (See picture 2 below)
2. Remove the SIM card from into Holder in the Largest size. (See picture 1 below)
3. Put the SIM card (text side up with the cut off corner in first) into the SIM 2 slot shown with the arrow below. Press it in until it is flush with the metal.
Note: If you press it in far enough it may pop out. if this happens just press it back in again and only until it is flush with the metal.