- Connect to your ICG using WiFi and then login to the Local Web UI
- Network > WAN/LAN Switch
- Change the drop-down to WAN then configure the interface as desired. Typically this will be configured to obtain a DHCP lease from the network. If so, then your configuration should look like the below.
- Press Apply and wait while your system updates it's configuration.
- To verify that the settings are working correctly, plug the cable into the ETH WAN/LAN1 port and plug it into your network. Then browse to the Status > Network Connections page. You should now see the WAN section reporting an IP address, Gateway, and Status should be "Connected"
How to convert the ICG-150 into Eth WAN configuration Print
Modified on: Tue, 10 Sep, 2024 at 8:15 AM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.