You can use the following table to understand the current state of your system based on the LEDs.
Indicator | Meaning |
System | Off --- Power off Steady red --- Powering On Blinking red --- System error Steady green --- System working Blinking blue --- firmware updating |
Cellular
| Blinking red --- Unable to access the cellular network Steady blue --- 4G cellular connection successful Steady green --- 5G cellular connection successful |
Signal
| Steady red --- Poor signal strength (ASU≤9) Steady blue --- Medium signal strength (10≤ASU≤19) Steady green --- Good signal strength (20≤ASU) |
WAN
| Off --- Disconnected Steady green --- Port working properly Blinking green --- Data transferring |
LAN
| Off --- Disconnected Steady green --- Port works properly Blinking green --- Data transferring |
Wi-Fi 5GHz
| Off --- AP mode disabled Blinking green --- AP mode enabled Steady green --- The STA device successfully connects to this device |
Wi-Fi 2.4GHz
| Off --- AP mode disabled Blinking green --- AP mode enabled Steady green --- The STA device successfully connects to this device |
