Thank you for your purchase of an ICG-550 cellular router!  This short guide will walk you through the basics of getting the device setup to provide you with the latest 5G cellular connectivity!

1. Unbox the system.  You will find the router and power adapter upon opening the box, while the standard paddle antennas are packed underneath the router.

2. Gently screw the six cellular antennas into place.  Tighten by hand only!

3. Plug the DC power supply into a 120V outlet and the barrel connector into the rear of the ICG-550.

4. Make sure the switch is in the "on" position!

5. Validate connectivity via the LED pattern.

6. Connect to your network via Ethernet!

If you have problems or need assistance please reach out to our support team by creating a ticket or via email: