Sometimes you may need to connect to the webpage running on the ICG-450 in case of troubleshooting or resolving offline problems.  This guide will walk you through the process of getting connected!


NOTE: Due to changes in browser security settings many web-browsers will not open the local webpage.  To get connected please read the following article: Web Browser Technical Issues


1. Get your computer connected to the ICG-450.  You can connect to the WiFi Access Point or plug into one of the Ethernet ports if there is a port available.  If your system has a static cellular IP you can use that address from any network connection.  In most cases you will want to open a browser and navigate to https://192.168.2.1. You should then see the below page.

2. Enter the User Name of "admin" and the password that is shown on the bottom sticker on your ICG-450.


3. If you entered your credentials correctly you will be redirected to the Dashboard




4. Once you are at the dashboard you can view the system status, edit settings, or download logs.


Need more help?  Please reach out to one of our Support team!